AVL Webinar: Simulation of Electromagnetic Excitations for NVH Analysis

AVL Webinar: Simulation of Electromagnetic Excitations for NVH Analysis

Not only do the gears and bearings have a major influence on sound radiation, but also electric motors.

Electromagnetic excitations are conducted into the housing via the stator teeth and radiated at the surface in the form of sound. In a multi-body simulation, these excitations are usually introduced into the simulation as load boundary conditions using a pre-calculated characteristic diagram, since a co-simulation would considerably increase the computing time.

In this AVL webinar, Marc Janousek, Simulation and Support Engineer, presents a workflow for calculating the map of stator tooth forces and torque fluctuations on the rotor.

Based on the requirements of an electric motor or the finished geometry, an electromagnetics simulation is set up in a fully automated way and the input data for AVL EXCITE M is created from its results. The webinar will address how to proceed and what input data is available for the differently detailed e-motor joints in AVL EXCITE M.

Key topics and takeaways:• Presentation of the automated workflow for creating an electromagnetic simulation of e-motors in AVL COMPOSE• Generation of input data for 3D multibody simulation in AVL EXCITE M with different levels of detail (e.g. with and without eccentricity)• Analysis of electromagnetic excitations in AVL IMPRESS M

Watch the webinar from AVL

Watch the webinar from AVL

The post AVL Webinar: Simulation of Electromagnetic Excitations for NVH Analysis first appeared on EV Tech Insider.